An under road bore is a trenchless crossing that installs pipe, conduit, or casing beneath a road without cutting the pavement or closing traffic lanes. Instead of digging across the roadway, crews bore horizontally from one side to the other, then pull or push the new line through the finished path. The road stays open, the pavement stays intact, and the crossing is completed below the surface.
At PL-Enerserv, road crossings are a routine part of the pipeline construction and boring work we deliver across the Northeast, Midwest, and Southeast United States. This guide covers how under road bores work, the methods used, what permits typically apply, and what separates a clean crossing from a costly one.
What Is an Under Road Bore?
An under road bore is any boring operation used to cross beneath a public or private roadway, from a two-lane county road to a multi-lane highway. The goal is the same in every case: get the pipeline or utility from one side of the road to the other without disturbing the road surface or the traffic on it.
Road crossings are one of the most common reasons trenchless methods exist at all. Open cutting a road requires lane closures, traffic control, saw cutting, excavation, backfill compaction, and full pavement restoration, and many road owners simply won't permit it on busy or recently paved roads. Boring underneath avoids nearly all of that.
Methods Used for Under Road Bores
There isn't a single way to bore under a road. The right method depends on the crossing length, pipe size, soil conditions, and whether the line needs to follow a precise grade.
| Method | How It Works | Best Suited For |
|---|---|---|
| Directional boring (HDD) | A steerable drill head bores a guided path, which is reamed and the pipe pulled back through | Longer crossings, curved paths, avoiding existing utilities |
| Auger boring (jack and bore) | A casing pipe is jacked through the soil while a rotating auger removes spoil from inside | Straight crossings needing accurate line and grade, steel casing installs |
| Pneumatic piercing | An air-powered tool hammers through soil, displacing it to create a small path | Short crossings for small diameter service lines |
Directional boring is the most flexible option. Because the drill head is steerable and tracked in real time, the bore can dip under the road, curve around existing utilities, and come back up at a precise exit point. For a full walkthrough of the process, see our guide on how directional boring works.
Auger boring, often called conventional boring or jack and bore, is a common choice for road and railroad crossings that require a steel casing pipe. It runs in a straight line between two pits, which makes it well suited to crossings where line and grade accuracy matter.
Pneumatic piercing is the simplest option, typically limited to short, small diameter runs such as a residential service line under a driveway or side street.
How an Under Road Bore Comes Together
Most road crossings follow the same general sequence, regardless of method.
1. Permitting and road owner approval. Before any work begins, the road owner, whether that's a state department of transportation, county, or municipality, typically requires a permit specifying depth, location, casing requirements, and traffic control. Road owners follow utility accommodation policies shaped in part by guidance from the Federal Highway Administration (FHWA).
2. Utility locating. Roadway rights of way are often crowded with water, sewer, gas, electric, and telecom lines. Every existing line along the bore path is located and, where the bore comes close, physically exposed through potholing.
3. Pit excavation. Entry and exit pits are dug on each side of the road, outside the pavement and typically outside the shoulder or clear zone required by the permit. Our guide to bore pits covers how these are sized and protected.
4. Boring the crossing. The bore advances beneath the road at the depth specified in the permit, with crews monitoring position, fluid returns, and ground conditions throughout.
5. Installing the pipe or casing. The product pipe, or a casing pipe with the carrier pipe installed inside it, is pulled or pushed through the finished bore.
6. Restoration. Pits are backfilled and compacted, and the right of way is restored to the road owner's standards.
Permits, Depth, and Casing Requirements
Requirements for an under road bore vary widely by road owner, but a few items come up on almost every permit:
- Minimum depth of cover beneath the pavement and the roadside ditch, which is often deeper for highways than for local roads
- Casing requirements, since some road owners require the carrier pipe to be installed inside a larger casing pipe, while others allow uncased crossings depending on the pipe type and pressure
- Pit setbacks that keep excavations a minimum distance from the edge of pavement
- Traffic control plans for any equipment or crew activity near live traffic
- Inspection and as-built documentation submitted to the road owner after the crossing is complete
Pipeline operators may also have their own crossing specifications, including coating, wall thickness, and testing requirements, that apply on top of the road owner's permit.
Risks an Experienced Crew Manages
An under road bore avoids the disruption of open cutting, but it still carries risks that have to be managed carefully:
- Pavement settlement or heave, caused by over-excavation, loss of ground, or excessive fluid pressure beneath the road
- Inadvertent fluid returns, where drilling fluid surfaces through cracks or joints in the pavement
- Utility strikes, especially in congested road rights of way
- Line and grade deviation, which can conflict with permit depth requirements or existing infrastructure
Each of these is managed through proper locating, engineered bore depth, fluid monitoring, and the right equipment for the soil conditions. For more on the rigs and tools used on these crossings, see our overview of directional boring equipment.
Frequently Asked Questions
How deep is an under road bore? Depth is set by the road owner's permit and the project design. Local roads may require only a few feet of cover, while state highways and interstates often require significantly more beneath the pavement and roadside ditches.
Does an under road bore require a permit? Almost always. State, county, and municipal road owners typically require a permit before any crossing beneath their roadway, along with traffic control and restoration requirements.
Do pipelines under roads need a casing? It depends on the road owner, the pipeline type, and applicable regulations. Some crossings require a steel casing around the carrier pipe, while others allow the pipe to be installed uncased with added coating or wall thickness.
Is boring under a road cheaper than open cutting? Often, yes, once traffic control, pavement saw cutting, backfill, and full pavement restoration are factored in. On busy roads, open cutting may not be permitted at all.
Plan Your Next Road Crossing With PL-Enerserv
A successful under road bore depends on accurate locating, the right boring method, and a crew that knows how to work within road owner requirements. PL-Enerserv performs directional boring and conventional boring for road crossings throughout the Northeast, Midwest, and Southeast.
If your project includes a road, highway, or driveway crossing, contact us to talk through your route and permit requirements, or explore our full range of pipeline services.


